Grote boosdoener bij de opname van geluid is heel vaak de wind. Daarom verkoopt Art & Craft windkapjes in alle vormen en kleuren. Daarnaast vind je bij ons ook shockmounts, sticky pads om dasspeld microfoons te bevestigen en nog veel meer.
The Boompole Clips are designed to quickly and easily mount onto any compatible RØDE boompole to secure the microphone lead and minimise any movement. Supplied in a pack of 5. Clip for securing cables to boompoles Supplied in a pack or 5
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon 3-metre cable is shielded and reinforced with heavy-duty Kevlar. Cable for use with the MiCon connector system 3m (10') or 1.2m long Black (also comes in pink)
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-10 is designed to connect to MIPRO transmitters with 4-pin mini XLR connector. MIPRO is a registered name and trademark owned by MIPRO Electronics. MiCon connector for select MIPRO wireless devices
The Universal Blimp Mount is an interchangeable mounting adaptor for the RØDE Blimp windshield shock mounting system. It allows for easy mounting of the Blimp onto a boompole, stand or any other mounting device with a 3/8-inch thread. Universal lightweight mounting adaptor for RØDE Blimp Allows for easy mounting of the Blimp onto any boompole, boom stand or any other mounting device
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-7 is designed to connect to Lectrosonics SM Series, UMa Series, LMa Series and UM450 transmitters. Lectrosonics and the Lectrosonics products listed are registered names and trademarks owned by Lectrosonics Inc. MiCon connector for select Lectrosonics wireless devices
The Blimp is the ultimate windshield and shock mounting system for RØDE shotgun microphones, as well as any third-party shotgun microphone up to 325mm in length. It features a Rycote® Lyre® suspension system for superior isolation from handling noise, plus an ultra-lightweight and ergonomic handle. Housed inside the grip is a heavy-duty Mogami® cable that splits via a junction box to a flexible thin cable inside the Blimp, which minimise the transference of vibration to the microphone. The Blimp attaches to any standard boompole with a 3/8-inch thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole. The Dead Wombat windshield, caring brush and tail/patch cable are included. Complete windshield and shock mount system for shotgun microphones Rycote® Lyre® suspension system for superior isolation from handling noise Ultra-lightweight design Attaches to any standard boompole 10-year warranty (no registration required)
The Micro Boompole Pro is a unique, modular boompole that allows location sound engineers to capture audio in confined or difficult spaces. Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine for a maximum reach of 2.2 metres. Using an industry standard 3/8” thread, additional sections can also be used to extend the Micro Boompole Pro to reach to over 3.7m (12'). Ultra-lightweight modular boompole 2.2m (7.2') reach, extendable to 3.7m (12') Optimised for VideoMicro
The CLIP1 is a cable management clip that is designed to allow optimal mounting of RØDE MiCon cables. Supplied in a pack of three. Cable management clip for MiCon cables Pack of three
The WS4 is a high-quality foam windshield that is designed to fit the RØDE NT4 stereo microphone. It helps prevent wind noise and any hard plosive sounds overloading the microphone capsule. High-quality foam windshield for RØDE NT4
Key Features: The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. High-performance windshield for RØDE VideoMicro, VideoMic Me, VideoMic Me-L and VideoMic Me-C Acoustically transparent synthetic fur Easy to fit and remove Comes in grey, pink, green, blue and orange
Key Features: The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. High-performance windshield for RØDE VideoMicro, VideoMic Me, VideoMic Me-L and VideoMic Me-C Acoustically transparent synthetic fur Easy to fit and remove Comes in grey, pink, green, blue and orange
Key Features: The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. High-performance windshield for RØDE VideoMicro, VideoMic Me, VideoMic Me-L and VideoMic Me-C Acoustically transparent synthetic fur Easy to fit and remove Comes in grey, pink, green, blue and orange
Key Features: The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. High-performance windshield for RØDE VideoMicro, VideoMic Me, VideoMic Me-L and VideoMic Me-C Acoustically transparent synthetic fur Easy to fit and remove Comes in grey, pink, green, blue and orange
The Boompole Bag is a high-quality neoprene carry bag designed to accommodate a boompole with shock mount and microphone attached for easy transport. High-quality neoprene carry bag Accommodates a boompole, shock mount and microphone
The Lav-Headset is an ergonomic headset-style wearable mount for a RØDE lavalier, allowing the microphone to be worn close to the mouth for optimal audio performance. Engineered from spring steel that has been plated for lifelong durability, the Lav-Headset is designed to hold its shape even with rigorous use. Integrated cable management at the rear of the mount ensures that the microphone cable is tightly secured and provides strain relief. The Lav-Headset is available in three sizes to comfortably accommodate a range of head sizes. As a general guide, the Large size is suitable for adults (18 years and over) Ergonomic headset mount for RØDE lavalier microphones Engineered from highly durable spring steel Integrated cable management Available in Junior, Medium or Large sizes
The PG2-R is a professional-grade pistol grip designed for using shotgun microphones and other compatible microphones in handheld applications. It features dual Rycote® Lyre® mounts to ensure maximum isolation from handling vibrations, four possible mounting points to suit the complete range of compatible RØDE shotgun microphones, and an integrated cable management clip.The PG2-R is lightweight and extremely comfortable. The grip houses multiple cable mounting points, with a dedicated space for the PG2-R Pro Cable to terminate flush with the base for easy connection to an XLR cable. It also features a heavy-duty locking nut for adjusting the angle of the microphone and a 3/8-inch thread on the base for attaching the grip to boompoles and microphone stands. Professional-grade pistol grip for shotgun microphones Dual Rycote® Lyre® mounts for maximum isolation from handling noise Lightweight and extremely comfortable Easy connectivity with XLR cables using PG2-R Pro Cable
The Lav-Headset is an ergonomic headset-style wearable mount for a RØDE lavalier, allowing the microphone to be worn close to the mouth for optimal audio performance. Engineered from spring steel that has been plated for lifelong durability, the Lav-Headset is designed to hold its shape even with rigorous use. Integrated cable management at the rear of the mount ensures that the microphone cable is tightly secured and provides strain relief. The Lav-Headset is available in three sizes to comfortably accommodate a range of head sizes. As a general guide, the Large size is suitable for adults (18 years and over) Ergonomic headset mount for RØDE lavalier microphones Engineered from highly durable spring steel Integrated cable management Available in Junior, Medium or Large sizes
The Tripod is a collapsible mini tripod designed for mounting lightweight microphones, cameras or accessories that support either 1/4-inch or 3/8-inch mounting. It provides 360-degree rotation and a wide angle of vertical adjustment. The tripod stand is fitted with a 1/4-inch thread and ships with a 3/8-inch thread adaptor for use with most standard mic clips. Collapsible mini tripod for mounting microphones and other devices 1/4-inch thread, supplied with a 3/8-inch thread adaptor
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-6 is designed to connect to AKG PT40, PT60, PT61, PT80, PT400, PT2000 and PT4000 transmitters, as well as the Audix RAD-360. AKG, Audix and the AKG and Audix products listed are registered names and trademarks of their respective owners. MiCon connector for select AKG and Audix wireless devices
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-8 is designed to connect to Sony UWP transmitters. Sony and the Sony products listed are registered names and trademarks owned by Sony Corp. MiCon connector for select Sony wireless devices
The SM3-R is a suspension shock mount for mounting RØDE shotgun and small-diaphragm studio microphones onto a camera. The SM3-R is equipped with dual Rycote® Lyre® mounts to ensure maximum isolation from any handling vibrations, four possible mounting points to suit the complete range of compatible RØDE shotgun microphones, and integrated cable management clip. Premium shock mount for shotgun and small-diaphragm condenser microphones Cold shoe mount compatible Includes 3/8-inch thread for boom mounting
The VXLR+ is a 3.5mm female TRS to male XLR adaptor, which will convert 12-48V phantom power down to 3-5V plug-in power, allowing RØDE on-camera microphones such as the VideoMicro and VideoMic GO, as well as self-worn microphones like the HS2, to receive power from an XLR input. It also features a locking connector for added security. Female 3.5mm TRS mini-jack to male XLR adaptor Converts 12-48V phantom power to 4V plug-in power Locking connector
Key Features: The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. High-performance windshield for RØDE VideoMicro, VideoMic Me, VideoMic Me-L and VideoMic Me-C Acoustically transparent synthetic fur Easy to fit and remove Comes in grey, pink, green, blue and orange
Trustpilot
