The Micro Boompole Pro is a unique, modular boompole that allows location sound engineers to capture audio in confined or difficult spaces. Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine for a maximum reach of 2.2 metres. Using an industry standard 3/8” thread, additional sections can also be used to extend the Micro Boompole Pro to reach to over 3.7m (12'). Ultra-lightweight modular boompole 2.2m (7.2') reach, extendable to 3.7m (12') Optimised for VideoMicro
Rode VideoMic Rode is inmiddels uitgegroeid tot een van de belangrijkste producent en leverancier van microfoons. De microfoons worden in Australie in de eigen Rode fabriek ontworpen en geproduceerd. Moderne productie methoden zorgen er voor dat de de microfoons aan zeer hoge kwaliteitsnorm voldoen en de productiekosten toch laag blijven. Daardoor zijn Rode microfoons interressant geprijsd en kwalitatief vergelijkbaar met veel duurdere microfoons in de markt.
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-5 is designed to connect to a standard 3-pin XLR with P48 phantom power. MiCon connector for standard 3-pin XLR devices
The Boompole Clips are designed to quickly and easily mount onto any compatible RØDE boompole to secure the microphone lead and minimise any movement. Supplied in a pack of 5. Clip for securing cables to boompoles Supplied in a pack or 5
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon 3-metre cable is shielded and reinforced with heavy-duty Kevlar. Cable for use with the MiCon connector system 3m (10') or 1.2m long Black (also comes in pink)
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-10 is designed to connect to MIPRO transmitters with 4-pin mini XLR connector. MIPRO is a registered name and trademark owned by MIPRO Electronics. MiCon connector for select MIPRO wireless devices
The Universal Blimp Mount is an interchangeable mounting adaptor for the RØDE Blimp windshield shock mounting system. It allows for easy mounting of the Blimp onto a boompole, stand or any other mounting device with a 3/8-inch thread. Universal lightweight mounting adaptor for RØDE Blimp Allows for easy mounting of the Blimp onto any boompole, boom stand or any other mounting device
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-7 is designed to connect to Lectrosonics SM Series, UMa Series, LMa Series and UM450 transmitters. Lectrosonics and the Lectrosonics products listed are registered names and trademarks owned by Lectrosonics Inc. MiCon connector for select Lectrosonics wireless devices
The Blimp is the ultimate windshield and shock mounting system for RØDE shotgun microphones, as well as any third-party shotgun microphone up to 325mm in length. It features a Rycote® Lyre® suspension system for superior isolation from handling noise, plus an ultra-lightweight and ergonomic handle. Housed inside the grip is a heavy-duty Mogami® cable that splits via a junction box to a flexible thin cable inside the Blimp, which minimise the transference of vibration to the microphone. The Blimp attaches to any standard boompole with a 3/8-inch thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole. The Dead Wombat windshield, caring brush and tail/patch cable are included. Complete windshield and shock mount system for shotgun microphones Rycote® Lyre® suspension system for superior isolation from handling noise Ultra-lightweight design Attaches to any standard boompole 10-year warranty (no registration required)
Fully integrated audio production studio for streamers, podcasters, musicians and content creators Ultra-low-noise, high-gain Revolution Preamps™ (-131.5dBV EIN, 76dB gain) Four high-quality Neutrik® combo inputs for connecting microphones, instruments and line-level devices Built-in wireless receiver for connecting up to two RØDE Series IV transmitters (including Wireless GO II and Wireless ME) Nine individually assignable channels with six broadcast-quality physical faders and three virtual faders High-performance quad-core audio engine Studio-grade APHEX® audio processing and on-board effects Eight fully programmable SMART pads with bank switching Dual USB-C interfaces for connecting two computers or mobile devices Advanced Bluetooth® connectivity for high-quality phone call integration Multitrack or stereo recording to a microSD™ card, USB storage device or computer Four high-power headphone outputs and balanced ¼-inch line outputs 5.5-inch high-definition touchscreen with haptic feedback and rotary encoder for easy navigation and control New features and enhancements via regular firmware updates Designed and made in RØDE’s state-of-the-art facilities in Sydney, Australia Revolutionary Sound World-class Revolution Preamps™ deliver pristine audio quality with any microphone or instrument. Designed from the ground up specifically for the RØDECaster Pro II, these ultra-low-noise, high-gain preamps will give you plenty of output while remaining incredibly quiet, eliminating the need for microphone boosters, lifters or external processing. Sonic purity has never been more accessible. Powered by APHEX® Craft your sound with studio-quality audio processing powered by one of the most revered names in pro audio: APHEX. On-board is a suite of authentic emulations of legendary hardware audio processors, including the Aural Exciter™, Big Bottom™ and Compellor™ master compressor/leveller. There is also a studio-quality compressor, noise gate, high-pass filter, de-esser and three-band equaliser for each channel, all powered by APHEX. Sound exceptional every time you hit record. Incredible Audio, Incredibly Easy The RØDECaster Pro II is incredibly simple to navigate using the large high-definition touchscreen and tactile rotary encoder, giving you hands-on control over every aspect of your sound. Getting set up takes seconds, and with professionally tailored presets and our intuitive VoxLab™ processing editor allowing you to dial your perfect sound with the tap of button or twist of a knob, taking your audio to new heights has never been easier. Not Just Sound Pads. SMART Pads Other consoles have sound pads. The RØDECaster Pro II has SMART pads. Trigger on-the-fly voice effects like reverb, echo, pitch and robot FX, send MIDI commands to external software, activate automated mixer actions like fade ins and fade outs. And yes, fire off sound effects, music beds, samples or jingles. Unlimited creativity and control at your fingertips. Endless Customisation. Endless Creative Freedom. No matter what kind of content you’re creating, the RØDECaster Pro II can be customised to suit your recording setup, your ideal workflow, and your unique sound. The nine channels are individually assignable, allowing you to create personalised mixer configurations. Every processor and effect can be tweaked to taste on-board using the advanced editor, each SMART pad is fully programmable (with eight banks of eight pads for a total of 64 unique actions available), and the bright RGB LEDs can be customised to suit your setup and aesthetic. The possibilities are endless. All Your Devices, Connected The RØDECaster Pro II offers unrivalled device connectivity options, making it extremely versatile for any content creation application. Connect microphones, guitars, basses, keyboards and line-level devices using the four Neutrik™ combo jacks. Monitor your audio with four pairs of headphones via the high-power headphone outputs or speakers via the balanced ¼-inch line outputs. Record ultra-high-quality phone calls or stream audio in high-definition via the advanced Bluetooth® connections. Simultaneously connect two computers or mobile devices using the dual USB interfaces for everything from recording remote podcasts to streamlining complex streaming setups. It’s the perfect audio control centre for any creator. Get The Most from Your RØDECaster Pro II The RØDECaster Pro II is fully updateable, with new features and enhancements being added via regular firmware updates. Ensure your RØDECaster Pro II is running the latest firmware to get the most out of it. Updates can be downloaded wirelessly on-board or via RØDE Central. Master Your RØDECaster Pro II Access Beta Firmware To be the first to test out new features for your RØDECaster Pro II, click here to learn more about how to access beta firmware updates.
The Micro Boompole Pro is a unique, modular boompole that allows location sound engineers to capture audio in confined or difficult spaces. Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine for a maximum reach of 2.2 metres. Using an industry standard 3/8” thread, additional sections can also be used to extend the Micro Boompole Pro to reach to over 3.7m (12'). Ultra-lightweight modular boompole 2.2m (7.2') reach, extendable to 3.7m (12') Optimised for VideoMicro
The CLIP1 is a cable management clip that is designed to allow optimal mounting of RØDE MiCon cables. Supplied in a pack of three. Cable management clip for MiCon cables Pack of three
The WS4 is a high-quality foam windshield that is designed to fit the RØDE NT4 stereo microphone. It helps prevent wind noise and any hard plosive sounds overloading the microphone capsule. High-quality foam windshield for RØDE NT4
Key Features: The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. High-performance windshield for RØDE VideoMicro, VideoMic Me, VideoMic Me-L and VideoMic Me-C Acoustically transparent synthetic fur Easy to fit and remove Comes in grey, pink, green, blue and orange
Key Features: The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. High-performance windshield for RØDE VideoMicro, VideoMic Me, VideoMic Me-L and VideoMic Me-C Acoustically transparent synthetic fur Easy to fit and remove Comes in grey, pink, green, blue and orange
Key Features: The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. High-performance windshield for RØDE VideoMicro, VideoMic Me, VideoMic Me-L and VideoMic Me-C Acoustically transparent synthetic fur Easy to fit and remove Comes in grey, pink, green, blue and orange
Key Features: The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors. High-performance windshield for RØDE VideoMicro, VideoMic Me, VideoMic Me-L and VideoMic Me-C Acoustically transparent synthetic fur Easy to fit and remove Comes in grey, pink, green, blue and orange
The Boompole Bag is a high-quality neoprene carry bag designed to accommodate a boompole with shock mount and microphone attached for easy transport. High-quality neoprene carry bag Accommodates a boompole, shock mount and microphone
The Lav-Headset is an ergonomic headset-style wearable mount for a RØDE lavalier, allowing the microphone to be worn close to the mouth for optimal audio performance. Engineered from spring steel that has been plated for lifelong durability, the Lav-Headset is designed to hold its shape even with rigorous use. Integrated cable management at the rear of the mount ensures that the microphone cable is tightly secured and provides strain relief. The Lav-Headset is available in three sizes to comfortably accommodate a range of head sizes. As a general guide, the Large size is suitable for adults (18 years and over) Ergonomic headset mount for RØDE lavalier microphones Engineered from highly durable spring steel Integrated cable management Available in Junior, Medium or Large sizes
Trustpilot
